Cost-effective solution that provides higher bandwidth and transmission rates and supports longer distances with lower loss than 62.5/125 fiber. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The patented injection molding process provides each connection greater durability in resisting pulls, strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 50/125 multimode fiber, immune to electrical interference.
Connector 1: LC Male,
Connector 2: LC Male.
Features
Specifications
Buffer material: PVC Buffer OD: 900 ??m Jacket material: PVC (OFNR-rated) Jacket OD: 1.8 mm Attenuation at 850 nm: 3.75 dB/km Attenuation at 1310 nm: 1.5 dB/km Minimum bandwidth at 850 nm: 160 kHz/km Minimum bandwidth at 1310 nm: 500 kHz/kmMaximum tensile load: 100 N/cm Loaded minimum bend radius: 5 cm Unloaded minimum bend radius: 3 cm Crush resistance: 750 N/cm Impact resistance: 1,000 cycles Flex resistance: 5,000 cycles
Warranty: Lifetime Color: Orange Length: 20m Mfr: Cables To Go Weight: 0.001lbs
Your opinion is important to us.If
you have spotted a typo, discovered an incorrect price, or encountered a
technical issue on this page, we want to hear about it. Thanks again for your
feedback
