2 RJ45 jacks and 1 plug.100Mbps data transfer rates.Find out the number of the cable run and locate the corresponding Patch Panel port. There should be a single patch cable going from that port to a single router port.Unplug the patch cable at the patch panel and replace it with one of the two splitters by plugging the male end of the splitter into the patch panel port.Connect the two ports on the splitter to two ports on the router/switch using two patch cables.Go to the wall outlet at the user location and unplug the single patch cable and replace it with the other splitter. Plug both computers onto the splitter using two patch cables.
Features
The Network Splitters will not create a new hub or router port. If you have a 4 Port router and need to get a 5th computer working than these splitters are not for you.
Use one at the hub or switch, and one at the user side
2 RJ45 jacks and 1 plug.
2 Adapters are required to split a single line
Splits one 4 pair Cat5e cable into two Network connections
Your opinion is important to us.If
you have spotted a typo, discovered an incorrect price, or encountered a
technical issue on this page, we want to hear about it. Thanks again for your
feedback
